Imax Quattro B6

Features :

  • This is the iMax B6 Quattro charger.
  • The iMax Quattro B6 allows you to plug 4 batteries into on charger simultaneously, and it will intelligently and automatically charge all 4 of them at once to their maximum capacity. To top of it, the batteries being charged do not even need to have the same configuration. You can connect different chemistry (ni-mh/Ni-Cd/LiPo/LiFe) batteries into any of the charging ports.
  Specifications:
  • Input: DC 11 to 15V
  • Power source: 12V DC (car battery)/ AC mains PSU (>200Watts0
  • Charger power: 50Watts, current is regulated accordingly.
  • Discharger power: 5 watts, current is regulated accordingly
  • Cell count: 1-15 Nicd/NiMH cells; 1-6S LiPo/Lilon/LiFe cells; 1-10 Lead-Acide cells (2V to 20V)
  • Current drain for balancing Lithoum: 300mA
  • Charge termination: automatic, negative delta peak method for NiCd/NiMh; and automatic, voltage-dependent, CC-CV process
  • Dimensions: 225.4 x 158.6 x 62.4mm
  • Net weight: 1.09kg

 

  
 
   

Extreme Racing R-605

SPECIFICATIONS:
Operating Voltage Range : DC11.0~18.0Volt
AC to DC adaptor (DC11.0 ~ 18.0V/5A)

Circuit Power : Max. Charge power 50W
Max. Discharge power 5W

Charge Current Range : 0.1~5.0A
Discharge Current Range : 0.1~1.0A
Current drain for balancing Li~Po : 300mAh / cell
NiCd/NiMH battery cell count : 1~15 cell
Li-ion / Polymer cell count : 1~6 series
Pb battery voltage : 2V~20V
weight : 265g(net weight)
Dimensions : 133.2 x 80.6 x 33mm

 

 
   

Loong Max E6

Product details
* Operating voltage : DC 11 ~ 16v
* Nicad / Nimh : 1 ~ 15 Cells
* Li-Ion / Li-Poly / Li-Fe : 1 ~ 6 Series
* Charge current : 0.1 ~ 5.0A
* PB / Lead Acid : 2 ~ 20v
* Cell Ballancer : Up to 6S (series) Li-Poly
* Battery Memory : Up to 5 Battery Storage
* No. of Cycles : Up to 5 Cycles
* Weight : 500g
* Dimensions : 140x100x30mm
* Battery temperature cut-off : 20ºC ~ 80ºC or OFF
* Maxium charging capacity limit for safety : 10 ~ 9990 mAh or OFF
* Timer Limit : 10 ~ 720 Min or OFF
* Key beep and buzzer sound : ON/OFF
* Input power low alert : 10 ~ 11v
* Nicar & Nimh Delta Peak Sensitivity Setting Range : 1 ~ 20 mV
* Wait time between charge / discharge : 1 ~ 60 Minutes
* Include Aluminuim Box
 

 

 
iMAX B5 Lipoly Charger
 
Microprocessor controlled high-performance Balance LiPolymer charger. Balances 2,3,4 and 5 LiPolymer cells with discharge drain of up to 200mAh.
  • Li-Ion/Polymer 1-5 cells
  • Ni-MH/Cd 1-14 cells
  • Lead acid(Pb) 1-6cells
  • Charge rate: 0.1A to 5A
  • User settings:
    • Safety timer
    • Capacity limit
    • Low input voltage
    • Back-light brightness
  • 5Amps AC/DC adapter included!
 

 

 
 

iMAX B6 Lipoly Charger

 
Microprocessor controlled high-performance Balance LiPolymer charger. Balances 1,2,3,4,5 and 6 LiPolymer cells with discharge drain of up to 300mAh for balancing Li-po.
  • DC 11.0~18.0 volts input
  • Charge current 0.1~5.0A
  • Discharge current 0.1~1.0A
  • Li-Ion/Polymer 1~6 series
  • Ni-MH/Cd 1~15 cells
  • Lead acid(Pb) 2V~20V
  • Weight 277g(Net weight)
  • Dimensions 133x87x33mm
  • User settings:
    • Safety timer
    • Capacity limit
    • Low input voltage
    • Back-light brightness
  • Protective aluminum casing included!
  • 5Amps AC/DC adapter included!
     
 

Smart Plus Lipoly Charger

  • Batteries: Li-ion, Li-poly 7.4v - 18.5v

  • Size: 140mm*80mm*31mm

  • Input voltage: 12v-15v

  • Charger current: 1.3A steady current(4.2v steady voltage)

  • Power Consumption: Less than 5W of 12V (at idle)

  • Device weight: 400g (0.88 lbs)

  • Automatic balance charge and test cell function
     
  Lipo Charger Port

-Suitable for all kinds of Lipo Chargers